Wide Area Network (WAN)

Types and Characteristics of WANs

What is a WAN?

There are two prevailing definitions of a Wide Area Network (WAN). The book definition of a WAN is a network that spans large geographical locations, typically to interconnect multiple Local Area Networks (LANs). The practical definition of a WAN is a network that traverses a public network or commercial carrier, using one of several WAN technologies

What are its Main Components?

The main components for a WAN are routers, switches and modems. These components are described below in the hardware section.

CPE – Devices on the subscriber contracts are called customer premises equipment (CPE).
The subscriber owns the CPE or leases the CPE from the service provider. A copper or fiber cable connects the CPE to the service provider's nearest exchange or central office. This cabling is often called the local loop, or "last-mile".

DTE / DCE – Devices that put data on the local loop are called data circuit-terminating equipment, or data communications equipment (DCE). The customer devices that pass the data to the DCE are called data terminal equipment (DTE). The DCE primarily provides an interface for the DTE into the communication link on the WAN cloud.

Hardware

In a WAN you will need various types of hardware components for it to function. The typical items of hardware that you will need in a WAN are:

Router – An electronic device that connects a local area network (LAN) to a wide area network (WAN) and handles the task of routing messages between the two networks. Operates at layer 3, and makes decisions using IP addresses.

Switch – A switch is a network device that selects a path or circuit for sending a unit of data to its next destination. Operates at layer 2, and uses MAC addresses to send data to correct destination.

Modem – Short for modulator / demodulator, a modem that enables a computer to communicate with other computers over telephone lines. Operates at layer 1, where signals are converted from digital to analogue and vice versa for transmission and receiving.

Wan Standards

WANs operate within the OSI model using layer 1 and layer 2 levels. The data link layer and the physical layer. The physical layer protocols describe how to provide electrical, mechanical and functional connections to the services provided by the ISP. The data link layer defines how data is encapsulated for transmission to remote sites.

Encapsulation

Encapsulation is the wrapping of data in a particular protocol header. Remember that WANs operate at the physical layer and the data link layer of the osi model and that higher layer protocols such as IP are encapsulated when sent across the WAN link. Serial interfaces support a wide range of WAN encapsulation types, which must be manually specified. These types include SDLC, PPP, Frame delay etc. Regardless of WAN encapsulation used it must be identical on both sides of the point to point link.

Packet and Circuit Switching

Circuit switching and packet switching are both used in high-capacity networks.
The majority of switched networks today get data across the network
Through packet switching.

Circuit-switching is more reliable than packet-switching. Circuit switching is old and expensive, packet switching is more modern.

General Routing Issues

What is a Routing Protocol?

A routing protocol is a protocol that specifies how routers communicate and exchange information on a network. Each router has prior knowledge of its immediate neighbors and knows the structure of the network topology. The routers know this because the routing protocol shares this information.

Protocol

RIP (Routing Information Protocol) was one of the most commonly used protocols on internal networks. Routers use RIP to dynamically adapt changes to the network connections and communicate information about which networks routers can reach and the distance between them. RIP is sometimes said to stand for Rest in Pieces in reference to the reputation that RIP has for breaking unexpectedly and rendering a network unable to function.

Routing Algorithms

Distance Vector

This type of routing protocol requires that each router simply inform its neighbors of its routing table. The distance vector protocol is also known as the bellman-ford algorithm.

Link State

This type of routing protocol requires that each router maintain a partial map of the network. The link state algorithm is also know as Dijkstra's algorithm.

IGRP

IGRP is a type of distance vector routing protocol invented by cisco used to exchange routing data in a autonomous system. Distance vector protocols measure distances and compare routes. Routers that use distance vector must send all or a portion of their routing table in a routing update message at regular intervals to each neighbor router.

Addressing and Routing

What does routing mean?

Routing is the process of deciding how to move packets from one network to another.
The directions also known as routes can be learned by a router using a routing protocol then the information is passed from router to router along the route of the destination.

IP Address's

Every machine connected to the internet is assigned an IP address. An example of an IP address would be 192.168.0.1. IP addresses are displayed in decimal format to make it easier for humans to understand but computers communicate in binary form. The four numbers that separate an IP address are called Octets. Each position consists of eight bits. When added to together you get 32 ​​bit address. The purpose of each octet in an IP address is to create classes of IP addresses that can be assigned within a network. There are three main classes that we deal with Class A, B and C. The octets of an IP address are split into two parts Network and Host. In a class A address the first octet is the network portion, this determinates which network the computer belongs to, the last octets of the address are the hosts that belong to the network.

Sub netting

Sub netting allows you to create multiple networks within a class A, B or C address. The subnet address is the address used by your LAN. In a Class C network address you would have a subnet mask of 255.255.255.0. A subnet mask identifies which portion is network and which is host. For example 192.168.6.15 the first octet three octets are the Network address and the last octet being the host (Workstation). It is important to subnet a network because gateways need to forward packets to other LANS. By giving each NIC on the gateway an IP address and a Subnet mask it allows the gateways to route packets from LAN to LAN. Once the packet arrives at its destination, the gateway then uses the bits of the subnet portion of the IP address to decide which LAN to send the packets.

Circuit Switched Leased Lines

A circuit switched network is one that establishes a dedicated circuit (or channel) between nodes and terminals before the users may communicate. Here are some terminologies associated with a Circuit switched network.

Frame relay is a telecommunication service designed for cost-efficient data transmission between local area networks (LANs)

Basic rate interference is a service used by small business for internet connectivity. An ISDN BRI provides two 64 Kbps digital channels to the user.
Primary rate interface (PRI) is a telecommunications standard for carrying voice and data transmissions between two locations
All data and voice channels are ISDN and operate at 64kbit / s

Packet Switching

Http://www.raduniversity.com/networks/2004/PacketSwitching/main.htm – _Toc80455261

Packet switching refers to protocols in which messages are broken up into small packets before they are sent. Each packet is then transmitted over the Internet. At the destination the packages are reassembled into the original message. Packet switching main difference from Circuit Switching is that that the communication lines are not dedicated to passing messages from the source to the destination. In Packet Switching, different messages can use the same network resources within the same time period.

Http://en.wikipedia.org/wiki/Asynchronous_Transfer_Mode

Asynchronous Transfer Mode (ATM) is a cell relay, packet switching network and protocolwhich encodes data into small fixed-sized cells.

ISDN is used to carry voice, data, video and images across a telephone network. ISDN stands for integrated services Digital Network. Isdn also provides users with a 128kbps bandwidth. This is done through frame relay. Frame relay complements and provides a service between ISDN, which offers bandwidth at 128 Kbps and Asynchronous Transfer Mode which operates in somewhat similar fashion to frame relay but at speeds from 155.520 Mbps or 622.080 Mbps. Frame relay is based on the older X.25 packet switching technology and is used to transmit analogue signals such as telephone conversations.

PSDN stands for packet switched data network and is a data communication network. Packet switched networks do not establish a physical communication signal like the public telephone circuit (circuit switched network) Packets are sent on a fixed length basis and assigned with a source and a destination address. The packages then explicitly on the routers to read the address and route the packets through the network.

Mobile and Broadband Services

Digital Subscriber Line (DSL) is mainly used to bring high bandwidth connections to homes and small business's over a copper wire telephone line. This is can only be achieved if you stay within the range of the telephone exchange. DSL offers download rates of up to 6mbps allowing continuous transmission of video, audio and 3D effects. DSL is set to replace ISDN and compete with the cable modem in providing multimedia to homes. DSL works by connecting your telephone line to the telephone office over copper wires that are twisted together.

Asymmetric Digital Subscribers Line is most commonly used for home users. It provides a high download speed but a lower upload speed. Using ADSL, up to 6.1 megabits per second of data can be sent downstream and up to 640 Kbps upstream.

Http://en.wikipedia.org/wiki/Symmetric_Digital_Subscriber_Line

Symmetric Digital Subscriber Line is a digital subcriber line which runs over one pair of copper wires. The main difference between ADSL and SDSL is the difference in upload and download speeds. SDSL allows the same upstream data rate and downstream data rate as ADSL upstream can be very slow.

[Http://searchnetworking.techtarget.com/sDefinition/0],,sid7_gci558545,00.html

HDSL High bit-rate Digital Subscriber Line, one of the earliest forms of DSL, is used for wideband digital transmission within a corporate site and between the telephone company and a customer. The main characteristic of HDSL is that that provides equal bandwidth in both directions.

IDSL is a system in which data is transmitted at 128 Kbps on a regular copper telephone line from a user to a destination using digital transmission.

The Local Loop enables operators to connect directly to the consumer via copper local loops and then add their own equipment to offer broadband and other services. This process involves operators accessing local exchange buildings to connect to a network of copper lines which connect them to homes and businesses. BT is an Example of a Local Exchange. The local loop connecting the telephone exchange to most subscribers is capable of carrying frequencies well beyond the 3.4 kHz upper limit.

Benefits of using DSL

DSL can provide a virtual instantaneous transmission of voice, data and video over ordinary copper phone lines. A DSL connection can eliminate delays while waiting to download information and graphics from the Internet. It provides users with a cost effective high speed Internet connection. Another benefit is that a DSL connection is always on-line (like a LAN connection) with no waiting time for dialing or connecting.

There are now more than 10 million broadband connections in the UK. By December 2005 there were 9.792 million broadband connections in the UK and the average broadband take up rate during the three months to December was more than 70,000 per week.

Posted in general | Comments Off on Wide Area Network (WAN)

Recommended Software for Arena Management

When there is a little over a month left to enter the data for a thousand plus cattle penning teams into a fickle spread sheet software program that was built by good intentioned volunteers; the last thing anyone should be doing is looking for replacement software. However, as any event/entry secretary or producer knows this is sometimes the lifeline that is needed to get the job done.

The preparation of all of the necessary data combined with balancing a three-quarter of a million dollar show in the six weeks prior to its start should have been enough to do. Throwing in a new piece of software to learn and master would be considered ludicrous to say the least. The producers deemed it to be a necessity in view of the history of inconsistencies in the program currently in use.

With a three-year old recommendation in hand and very little back ground checking, Arena Management Software became the chosen lifeline. The software was purchased, loaded onto the computers, played with for a day or so and then our team went to work. The KCI support group was there, day and night, to help with the learning curve and any snags that presented themselves. Our team quickly realized that the new user-friendly software program we had taken a chance on was going to be our ongoing choice for future events. The show was a success. The producers and contestants were happy. All was good in our world!

There have been a lot of years pass by since those short six weeks when our group became acquainted with the Arena Management Software. The program still provides a user-friendly format that has the talent to produce minimal data to realms of reports. From rodeo to cattle penning events the product continues to amaze our team with its ability to perform in and out of the arena.

Posted in general | Comments Off on Recommended Software for Arena Management

How Has Technology Changed Art?

We all are witnessing the changes being made in the art these days. Technology has the power to change anything. It is changing the traditional art into digital art.

Amazing digital art has taken place of traditional art. Digital art is exploring itself in many different ways that one can imagine. Different software is developed to increase the presence of digital art.

Photoshop Artists are one of the most common digital artists who give an amazing look to a picture with the help of imaging software and different applications.

These applications are developed with the help of technology. Anyone can be a digital artist having knowledge and proficiency in Photoshop.

Difference between traditional artists and digital artists is that traditional artists use paint and cement for their art and digital artists use imaging software and applications in their art. Some of the applications have the power to create 3D art work.

Technology has taken art into a new level of creativity. Let us talk about how technology has changed traditional art into digital art. We know that internet is ruling the world with its power. So, artists decided to present their art online with the help of internet. This is possible with use of technology.

You must have seen art galleries and attended painting exhibitions in your life. These doesn’t work well these days so artists find a way where they can get more attention and more praise for their work. Most of the artistic stuff is now seen online and is circulated to the art lovers.

There are some places where exhibitions are held and we do respect them. But presenting paintings, sculptures and art work online is in trend. Some of the artists are also showing their art on the basis of card swipe panel or coins.

How this work – when you enter coins or swipe card in the panel, the panel shows you some of the art work for a few minutes and then gets closed and if you want to see it again or explore more, further you need to swipe your card or add coins into it. This is how artists are using technology.

How digital artists are using technology for their art work

Digital artists already in touch with technology are aware of the systems that are in trend and use them to create their art work and sell them online.

Some of the professional digital artists are earning a lot of bucks by selling their art work. They can also design the ones that you want and are also ready to make any modifications you need.

They use different software to explore their skills and made it more impressive. They are using technologies that offer new ways to express their art work in a realistic way for much more time.

They are using different types of media and mix them to provide a more creative art work. Their 3D art work looks as real as it is present live in front of you.

Technology not only brings changes in education, medical field, industry and business but also brings a huge change in the art work and the artists as well.

Technology opens different paths for the artists to enter into for a good earning. They made their profession more powerful along with their art work.

In our busy lives we hardly get time to meet each other and our loved ones. How can it be possible to see exhibitions and galleries? So technology has brought this change in the art workers to show their skills and talent to people from anywhere in the world.

Technology is getting advanced and making more useful for the common man as well as artists. Technology has provided us with several things that we should be thankful. One of them is digital art work.

Posted in general | Comments Off on How Has Technology Changed Art?

Benefits of an Android TV Box

The Android TV box is a useful piece of kit that connects to the TV via the HDMI port to offer most of the features of Android. This type of set up is very flexible and easily connects to most TVs with the right port and is a lot cheaper than a smart TV. Here are a few of the benefits of using the Android TV box:

Endless apps

One of the most appreciated benefits is the ability to use and install the endless apps that are now available on the Android operating system. By visiting the Google Play store using the internet connection, it is possible to install the latest apps related to not only multimedia content, but also audio editing applications, games, books, magazines, sending email, or signing into social media accounts, such as Facebook and Twitter.

TV support

By connecting the Android TV box to the TV at home via the internet; It is also possible to connect to other devices in the home, such as those that make use of technologies like Airplay, Miracast, DLNA, or others that function with Android. This makes it very flexible to share various types of multimedia with the TV. For instance, it is possible for an Android compatible tablet or smartphone to interact and control the TV while also giving the option to share files with a laptop or even watch a downloaded series or a movie on the large screen. Overall, this type of setup gives a simple gateway to get the internet on the TV.

Great price

The cost of upgrading a standard TV to benefit from all the possibilities of Android is relatively cheap compared to buying a smart TV. Plus, the combined standard TV and Android TV box can offer a lot more than a standard smart TV.

Regular updates

The Android operating system is updated on a regular basis, which means the latest version of a game, application, or system is always available. Plus, this is usually done automatically so there is no need to keep searching for updates when logged into the app store. This is significantly more convenient than a smart TV which can take a while to receive updates, especially when every brand of TV needs to have its own update created and released.

All in all, the Android TV Box makes it possible to enjoy the connectivity and versatility of Android on a standard TV set up.

Posted in general | Comments Off on Benefits of an Android TV Box

What Is The Difference Between ERP And Enterprise System?

Enterprise system and Enterprise Resource Planning System terms are similar but there is difference between an enterprise system and an ERP system. An ES or enterprise system is a large scale system which includes packages like ERP and CRM. ERP is a subset of Enterprise System or it can be said that ES is a superset of ERP. It contains a variety of solutions. ES contains applications and packaged solutions which can be directly used in an enterprise. On the other hand ERP system is the automation of the business processes and the solutions are in the form of modules which are designed according to the client’s requirements.

The functions are customized according to the client’s business environment. Enterprise system does not include architecture of other solutions whereas an ERP implementation automates systems using technical aspects. ERP system includes architectures and databases and is client server architecture. The system is server based therefore the consultant needs to be aware of the technical aspect too.

Another difference between an ES and an ERP system is that the ERP is aimed at improving the functionalities of the organization whereas the ES helps to improve the overall maintenance and accuracy. It provides for better solutions and aids in decision making. ES is difficult to implement compared to Enterprise resource planning and even the timeframe needed for implementation maybe more. The overall impact is high but so are the risks involved. If the ES is not implemented in the right manner, it can cause business failure and if implemented properly it can increase the efficiency and profits of the business organization. It is normally required when there is a big drawback in the current procedures and methodologies in the organization and need to be corrected. The company going in for enterprise system needs to be careful while choosing the software and the vendors due to the risk of failure involved.

The difference between an enterprise system and an ERP system is that ERP is mostly used for medium scale companies to big companies and ES is restricted to the big companies. There are many complex functions involved in big companies which cannot be provided solutions for alone by ERP. The role of ERP is restricted when compared to enterprise system because it does not include customer relationship or vendor management.

These applications are needed when the business process is complex and on a big scale. Therefore bigger organizations need to go with ES instead of enterprise resource planning alone. ERP is also an important system to streamline the internal processes but it does not provide for taking care of the external processes. Enterprise system takes care of the end to end business process of organization since it involves other applications also like SCM and CRM. There is quite a lot of difference between an enterprise system and an ERP and it depends on the company whether it wants to go with an ES to streamline the entire process starting from supplying, production and customer or whether he wants to go with an ERP system to streamline the internal process.

Posted in general | Comments Off on What Is The Difference Between ERP And Enterprise System?

Medical Coding History – From Paper to Medial Coding Software

If we define medical coding as the assignment of alphanumerical characters to diagnoses, diseases, and treatments, then medical coding has been traced back to the 1600s in England with the London Bills of Mortality. A more standardized system of coding was developed for classifying death at the tail end of the 19th century. In 1893, Jacque Bertillon, a statistician, created the Bertillon Classification of Causes of Death, a system which was eventually adopted by 26 countries at the beginning of the 20th century. Shortly after the Bertillon Classification system was implemented, people began discussing the possibility of expanding the system beyond mortality as a way of tracking diseases.

By the middle of the 20th century, the World Health Organization (WHO) adopted a goal of a single global classification system for disease and mortality, entitled the International Classification of Diseases, Injuries, and Causes of Death (ICD). This classification system is updated every 10 years. The latest revision, ICD-10, is scheduled for adoption in the United States in 2013.

What started out as a small set of medical codes has evolved into a complex system that was initially standardized by the American Medical Association back in 1966 with current procedure codes (CPT) codes that are updated annually.

In the late 1970s, the Healthcare Common Procedure Coding System (HCPCS) was developed based on CPT. HCPCS has three levels of codes: Level One is the original CPT system. Level Two codes are alphanumeric and include non-physician services such as ambulances and other transportation as well as patient devices such as prosthetic devices. Level Three codes were developed as local codes, and were discontinued in 2003 in order to keep all codes relevant worldwide.

Recently, medical coding systems have been expanded to include other medical specialties. For example, there are coding systems related to disabilities, the dental field, prescription drugs, and mental health.

As the coding systems have become more complex and diverse, the need for training of medical coders has grown exponentially. Private training schools and public colleges throughout the country have developed certification programs. In order to be awarded a certificate, students must obtain a two-year degree from an accredited medical coding school and pass an exam given by the AHIMA.

Over the past 20 years, many coding processes have shifted from a paper-based system to a computer-based system using medical coding software and medical billing software. Many companies sell complete medical software-based coding solutions and myriad of products for specific medical disciplines, such as products that are specifically tailored to skilled nursing facilities, physicians, hospitals, surgery, cardiology, and more.

As medical facilities and professionals begin preparing for the conversion to ICD-10 in 2013, the need for more sophisticated medical coding software solutions and qualified medical coders will continue to grow.

CPT is a registered trademark of the American Medical Association.

Posted in general | Comments Off on Medical Coding History – From Paper to Medial Coding Software

What Is The Difference Between ERP And Enterprise System?

Enterprise system and Enterprise Resource Planning System terms are similar but there is difference between an enterprise system and an ERP system. An ES or enterprise system is a large scale system which includes packages like ERP and CRM. ERP is a subset of Enterprise System or it can be said that ES is a superset of ERP. It contains a variety of solutions. ES contains applications and packaged solutions which can be directly used in an enterprise. On the other hand ERP system is the automation of the business processes and the solutions are in the form of modules which are designed according to the client’s requirements.

The functions are customized according to the client’s business environment. Enterprise system does not include architecture of other solutions whereas an ERP implementation automates systems using technical aspects. ERP system includes architectures and databases and is client server architecture. The system is server based therefore the consultant needs to be aware of the technical aspect too.

Another difference between an ES and an ERP system is that the ERP is aimed at improving the functionalities of the organization whereas the ES helps to improve the overall maintenance and accuracy. It provides for better solutions and aids in decision making. ES is difficult to implement compared to Enterprise resource planning and even the timeframe needed for implementation maybe more. The overall impact is high but so are the risks involved. If the ES is not implemented in the right manner, it can cause business failure and if implemented properly it can increase the efficiency and profits of the business organization. It is normally required when there is a big drawback in the current procedures and methodologies in the organization and need to be corrected. The company going in for enterprise system needs to be careful while choosing the software and the vendors due to the risk of failure involved.

The difference between an enterprise system and an ERP system is that ERP is mostly used for medium scale companies to big companies and ES is restricted to the big companies. There are many complex functions involved in big companies which cannot be provided solutions for alone by ERP. The role of ERP is restricted when compared to enterprise system because it does not include customer relationship or vendor management.

These applications are needed when the business process is complex and on a big scale. Therefore bigger organizations need to go with ES instead of enterprise resource planning alone. ERP is also an important system to streamline the internal processes but it does not provide for taking care of the external processes. Enterprise system takes care of the end to end business process of organization since it involves other applications also like SCM and CRM. There is quite a lot of difference between an enterprise system and an ERP and it depends on the company whether it wants to go with an ES to streamline the entire process starting from supplying, production and customer or whether he wants to go with an ERP system to streamline the internal process.

Posted in general | Comments Off on What Is The Difference Between ERP And Enterprise System?

Top 25 Terms All Computer Students Should Know

The following basic terminologies are considered the top 25 terms all computer students should know before they even begin their studies:

1. Bit: Binary data storage unit valued at either 1 or 0.

2. Byte: Eight data bits valued between zero and 255.

3. Word: Two data bytes or 16 data bits between zero zero and 16,535.

4. CD-ROM: A storage disk with approximately 640 megabytes of capacity.

5. CD-ROM Drive: Hardware used for reading and writing to CD-ROMs.

6. Storage Media: Magnetic devices that permanently store computer data.

7. File: Permanent storage structure for data kept on a hard drive or other permanent place.

8. Virus: Unauthorized programs that infect files or send themselves via email.

9. Vulnerability: When unauthorized access can be gained due to software errors.

10. Security Flaw: When attackers gain unauthorized system access due to a software bug.

11. Worm: Unwanted programs accessing computers via application / system vulnerabilities.

12. Hardware: Physical parts of computer (case, disk drive, monitor, microprocessor, etc.).

13. Software: Programs that run on a computer system.

14. Firmware: Software that has been permanently written into a computer.

15. ISP: Internet Service Provider.

16. BIOS: The basic input / output system computers use to interface with devices.

17. MIME: Multipurpose Internet Mail Extension.

18. Boot: What happens when a computer is turned on and beginning to run.

19. Crash: When computer software errors occur and programs fail to respond.

20. Driver: Program that understands interfaced devices like printers and video cards.

21. Network: Cables and other electrical components carrying data between computers.

22. Operating System: A computer's core software component.

23. Parallel: Sending data over more than one line simultaniously.

24. Serial: Sending data over a single line one bit at a time.

25. Protocols: Communication methods and other standard Internet / networking functions.

These are the top 25 terms all computer students should know before they even begin their technical training. Most computer students know much more. In fact, everyone who uses a computer these days should understand these terms so they can be better informed about the important tool that is so integral to our daily lives.

Posted in general | Comments Off on Top 25 Terms All Computer Students Should Know

How to Repair “Runtime Error 481”

The runtime error is one of the most common Windows problems that keep popping up and keeping your system from running smoothly and perfectly, even a small or a single error in the process will leave your system in a knot. This makes it even more important for any user to know how to fix runtime error 481. In order to fix or diagnose the problem correctly everyone should first know what the actual purpose of the runtime processes. It is an integral and essential part of the Windows system details to manage the handling of many services as well as many different software as running on the Windows platform. Since, the file actually handles a lot of information and settings at a time it is very prone to attack by many different viruses, malware and even spyware.

The problems – there can be many different symptoms to the errors related to the runtime process. The symptoms can range from a simple delayed operation of the software to much more complicated system freezes and error messages. This sort of problems may arise from many different factors starting from corruption of the system file due to a virus infection or any other malicious software to defective and invalid system registry entries.

Though the problems are varied but still the answer to the question remains pretty simple.

The solutions – the solution to the runtime error 481 can be many forms, as the problem itself may arise from many different sources. Though it is widely accepted that the most common reason for such errors is a corrupted registry entries but still many tools and software is required to be used in order to properly remove the problem.

  • If the error actually results after installing a new software always make sure to uninstall and reinstall the software to check whether the error was caused by it.
  • Is the process file is corrupted beyond repair it is always safe to replace the file with an original one from any windows XP CD using the system file Checker tool. This can also be achieved from the recovery console is the system has completely crashed due to the error and cannot be started in a normal way.
  • As the most common problems that can give out runtime related errors is widely identified as defective registry entries, it is best recommended that you always check your system with a proper registry cleaner before taking any drastic step.

Even if all of the above methods fail, you always have the option of reinstalling your operating system in order to solve the runtime error 481. Though this may seem the simplest one but the safest and wisest one would be to use a registry cleaner regularly and keep your system clean and healthy.

Posted in general | Comments Off on How to Repair “Runtime Error 481”

What Does a Salesforce Developer Do?

A Salesforce developer is tasked with handling and customizing the Salesforce software suite. This software is designed to help any business with customer relationship management. It handles almost any aspect of customer relationship management (CRM) with a number of products that are designed to help you maximize your business potential. A Salesforce developer can help you to combine all aspects of your business into an efficient force in the marketplace. From your business itself, the technology it uses, and the customers your business relies on, the software is there to help you with all your CRM needs.

So what exactly does a Salesforce developer to?

To put it simply, a Salesforce developer helps to customise this software to make customer relationship management more efficient. By making your CRM more efficient, this allows you to develop and maintain the relationships with your customers – which is a vital part of every business. The software contains several different applications that allows for a great deal of flexibility for your business – and there are many opportunities for customisation if you employ the help of a Salesforce developer.

Here are some of these applications:

Sales Cloud: Sales Cloud is the number 1 CRM app in the world and millions of businesses have used it to enhance their customer relations and grow their products. By taking advantage of cloud computing technology Sales Cloud is able to do more for you than other CRM apps.

Service Cloud: Service Cloud is all about helping you develop customer connections. By utilizing cloud technology Service cloud can help you improve your customer service centres and enhance your social media marketing efforts.

Marketing Cloud: Marketing Cloud is an all-in-one social networking suite. This product will help you build a social network from the ground up or can be used to improve on any social network you already have created.

Salesforce Platform: This product is perfectly designed to help you create apps for any purpose you need. A Salesforce developer can create amazing social apps, innovative real time apps, and take advantage of the growing mobile market with mobile apps. Apps are the next wave of marketing and a Salesforce developer can help you get on top.

Chatter: This product is designed to help you improve communication not only within your business but with your customers as well. By using Chatter you can collaborate and communicate with each other no matter where you are.

Work.com: This product is to help you get more out of your business by making employees more efficient and maximizing their time and talents. Again, you can talk to a Salesforce developer to ask if they can help you make the most of this product.

Whilst the above information gives some idea of what the software and a Salesforce developer can do for you, the best thing to do is to give it a try. Once you have everything set up and rolling you will be asking yourself why you didn’t do this sooner.

Once you’ve got to grips with the software, it’s time to think about making it work for your business. It’s really powerful, but to make the most of it, it’s advisable to employ the services of a Salesforce developer. Then you’ll really be unlocking its potential.

Posted in general | Comments Off on What Does a Salesforce Developer Do?